OnboardScales.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Sales, Service & Parts for:
Dump Truck Scales Logging Truck Scales Holland ILS fifth wheel Scale General Trucking Scales VPG Vulcan Scales Cardinal Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales Fifth wheel Scales Ez-Scale CAS Scales
Straight Chassis Scales Tipping Refuse Scales Custom Trailer Filling Scales LoadRunner Scales Intercomp Scales
TradeRoute HL Scales NTEP Onboard Truck Scales Underbody Truck Scales Air Ride Truck Scales Precision Loads Scales PNT Scales
Deflection Transducers Spreader Scales Forklift Scales NTEP Wheel Weigher Scales VPG SI Scales MSI Crane Scales
Refuse Front Fork Scales Concrete Truck Scale SI Tuffer Scales SI 9150 for all Systems Custom Scales Software Rice Lake Scales
Replacement Parts Vac Truck Scales SI Wheel Loader Scales OverLoad Monitoring Scale VPG LoadPro Scales VPG Onboard Scales
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.
ApexEgroup LLC
Direct Line:1-330-476-2422
 
Quotes@OnboardScales.com
Sales@OnboardScales.com
Celebrating 31 years of Service in the Scale Industry
International Sales: ApexEgroupLLC@gmail.com
Notice: Price increase! Vulcan Scales December 15   Year End Sale: 3% off Complete Systems & Free Shipping - Pay by check and get 3% more off (6% Total)
    Fifth Wheels & Trailer only systems includes Free Shipping

Notice: Vulcan Scales has been experiencing inventory problems due to high demand! You may experience 1 to 8 week leadtimes.  SI Scales is a great alterative with many items in stock!

Vulcan Deflection Transducer Systems

 

System Accuracy: Typically
+/- 2-3% of full scale load or better.

Deflection Transducer System Onboard Scales for Straight Body Trucks

Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Vulcan on-board scale systems allow optimum, safe use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.

The Vulcan Deflection transducer can be installed on several types of truck and trailer suspension components including: steel walking beams, front axles, and thru-trunnions including Mack camel back suspensions.  The transducers mount directly on suspension components, measure the component deflection, and convert the deflection into a corresponding weight.  Deflection transducers can also be placed on load carrying members to provide solutions for other on-board weighing and custom applications.
  • Easy to install - mounts on vehicle suspension components or load carrying members
  • Easy to operate using proven Vulcan electronics
  • Eliminate overweight fines
  • Monitor loading or unloading of weights at remote locations
  • Save time loading, weighing and adjusting the load
  • Reduce time and mileage by minimizing trips to commercial scale
  • Reduce maintenance costs by not overloading the vehicle
  • Prevent hauling freight in excess of contracted weight
Deflection Transducer System Accuracy: Typically +/- 2-3% of full scale load.
Digital Graduations: 10, 20, 50 100 or 200 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.

V300 Series Meters:

  • Display: LED, variable brightness
    0.6” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 1.25”D x 3.5”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10 to 15.0 Vdc
  • Current Draw: less than 1 amp
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: less than 12 oz (including mounting bracket)

VSL Vulcoder:

  • Size: 5.0”W x 2.5”D x 1.5”H (one and two lead Vulcoders)
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
The Vulcan V300 Series Electronics System combines the most advanced electronics with a user-friendly operation. The system works with existing Vulcan load cells and sensors. The V300 Series is ideal for applications requiring up to four channels, and for operators who wish to mix tractors and trailers.

Compatible with Third Party GPS Tracking, Reporting Systems

Meters with RS-232 output (serial data)
  • Easy to Calibrate
  • Compact size allows the meter to be mounted almost anywhere
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Automatically identifies and adjusts for different truck/trailer configurations
  • Select the two channel V320 or the four channel V340 meter depending on your application
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • Simple operation and calibration
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Complete system troubleshooting including individual load cell diagnostics
  • V-300 series Spec Sheet
DT-1 SINGLE AXLE SPRING SUSPENSION (G-713)
(1) M32A V320 Meter
(2) V40 VSL Vulcoder - 1 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) L51 Deflection Transducer, Neutral Axis (Rear Suspension)
(1) H62 Deflection Transducer Mounting Kit, Neutral Axis (Rear End Housing)
Installation Toolkit, Part No. 59-30048-003 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 20 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
DT-2 HENDRICKSON HAULMAAX SUSPENSION (G-733)
(1) M32A V320 Meter
(1) V40 VSL Vulcoder – 1 lead (10')
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(3) L42 Deflection Transducer, Standard (1 Front Axle, 2 Rear Suspension)
(3) H58 Deflection Transducer Mounting Kit, Standard
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 20 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
DT-3 MACK CAMEL BACK SUSPENSION (G-723)
(1) M32A V320 Meter
(2) V40 VSL Vulcoder – 1 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(2) L42 Deflection Transducer, Standard (Front Axle, Rear Suspension)
(2) H58 Deflection Transducer Mounting Kit, Standard
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
   
DT-4 HENDRICKSON HN, HENDRICKSON RT/RTE,
HENDRICKSON R/RS SUSPENSIONS (CAST STEEL BEAM)
(1) M32A V320 Meter
(1) V40 VSL Vulcoder – 1 lead (10')
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(3) L42 Deflection Transducer, Standard (Front Axle)
(3) H58 Deflection Transducer Mounting Kit, Standard
Installation Toolkit, Part No. 59-30048-001 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
DT-5 HENDRICKSON HN, HENDRICKSON RT/RTE,
HENDRICKSON R/RS SUSPENSIONS (FABRICATED STEEL BEAM)
(1) M32A V320 Meter
(1) V40 VSL Vulcoder – 1 lead (10')
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(3) L42 Deflection Transducer, Standard (1Front Axle, 2 Rear Suspension)
(1) H58 Deflection Transducer Mounting Kit, Standard
(2) H65 Deflection Transducer Mounting Kit, J-Bracket
Installation Toolkit, Part No. 59-30055-001 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
DT-6 VOLVO T-RIDE, FREIGHTLINER / STERLING TUFTRAC SUSPENSIONS
(1) M32A V320 Meter
(1) V40 VSL Vulcoder – 1 lead (10')
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(2) L51 Deflection Transducer, Neutral Axis (Rear Suspension)
(2) H62 Deflection Transducer Mounting Kit, Neutral Axis (Rear End Housing)
Installation Toolkit, Part No. 59-30048-003 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 25 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
DT-7 CAST STEEL BEAM SUSPENSIONS
(1) M32A V320 Meter
(1) V40 VSL Vulcoder – 1 lead (10')
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(3) L42 Deflection Transducer, Standard (1 Front Axle, 2 Rear Suspension)
(3) H58 Deflection Transducer Mounting Kit, Standard
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
DT-8 AIR SUSPENSION
(1) M32A V320 Meter
(1) C01 Cable, 40' Orange Stress-Flex
(1) V40 VSL Vulcoder - 1 lead (10')
(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) 49-10116-001 Ride Height Control Valve
(1) L40 Air Sensor, VSL (Rear Suspension)
There are some truck and trailer designs where the amount of air pressure does not correspond very well with weight. These suspensions are the "Slip spring and torque arm type suspension. Please see the following document to determine if the airs sensor may be used on your suspension In the event we are unable to use an sensor, we will determine another method for scaling your equipment. Above system is for an air suspension with a single ride height control valve. If suspension has a dual ride height control valve a dual port air sensor must be used. Please contact us for pricing.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-703 3-point deflection transducers
(1) M32A V320 Meter
(1) C01 Cable, 40' Orange Stress-Flex
(1) V40 VSL Vulcoder - 1 lead (10')
(1) V27 VSL Vulcoder - 2 lead (10')
(3) LXX Deflection Transducer
(3) HXX Deflection Transducer mounting kit
The Vulcan 3-point deflection transducers scale system provides a low cost method to scale many types of trucks. In this application the deflection transducers are mounted on the front axle and rear axle or suspension. The scale system measures gross vehicle weight, typically within 2 to 3 percent.
Ship Wt: 20 lbs Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.

 

G-713 1-point deflection transducers
(1) M32A V320 Meter
(1) C01 Cable, 40' Orange Stress-Flex
(1) V40 VSL Vulcoder - 1 lead (10')
(1) LXX Deflection Transducer
(1) HXX Deflection Transducer mounting kit
The Vulcan 2-point deflection transducers scale system provides a low cost method to scale many types of trucks. In this application the deflection transducers are mounted on the rear axle or suspension only. The scale system measures rear axle group weight, typically within 2 to 3 percent.
Ship Wt: 15 lbs Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-723 2-point deflection transducers for Camel Back & Front axle.
(1) M32A V320 Meter
(1) C01 Cable, 40' Orange Stress-Flex
(1) V40 VSL Vulcoder - 1 lead (10')
(1) LXX Deflection Transducer
(1) HXX Deflection Transducer mounting kit
The Vulcan deflection transducer scale system for a truck with a Mack Camel Back suspension provides a low cost method to scale many types of trucks. In this application shown above one deflection transducer is mounted on the front axle and a second deflection transducer is mounted on the rear trunnion of a Mack Camel Back suspension. The scale system provides a gross vehicle weight, typically within 2 to 3 percent.
Ship Wt: 20 lbs Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-733 2-point deflection transducers Rear suspension
(1) M32A V320 Meter
(1) C01 Cable, 40' Orange Stress-Flex
(1) V27 VSL Vulcoder - 2 lead (10')
(2) LXX Deflection Transducer
(2) HXX Deflection Transducer mounting kit
The Vulcan 2-point rear suspension deflection transducer scale system provides a low cost method to scale many types of trucks. Included are trucks with Haulmax, HN, and other suspension types. In this application the deflection transducers are mounted on the rear axle or suspension only. The scale system provides a gross vehicle weight, typically within 2 to 3 percent.
Ship Wt: 20 lbs Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.

Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.

Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.

Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.

Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish trips more efficiently and faster with full, legal loads.

Installation times are estimates on first time installations only. Actual installation times are dependent on the skill level of the mechanic and number of mechanics, shop equipment, on the need to possibly relocate other equipment on the truck or trailer.
Deflection Sensors on Hendrickson 462/463 and Haulmaxx Equalizing Suspension Beams (Includes Models HN 402, HN 462, HN FR, RT 463, RTE 463, HMX and HMX 400.)
For the best scale system accuracy, one sensor should be mounted on the forward arm of one suspension beam. The other sensor should be mounted on the rear arm on the opposite beam, as shown in drawing.

 

 

 

 

 

 

 

Notice: We record all calls for quality assurance. / $ 250.00 Minimum Orders / Some State Require's us to pay your State Sales Tax.
Most of our manufacture's (RLWS, SI & Vulcan Scales) has a presence in the states listed below. These States will not honor our tax certificate. To avoid paying sales taxes please provide tax exempt paper work for your company.
RLWS Taxable States:
CALIFORNIA, OHIO, FORIDA, HAWAII, MARYLAND, MASSACHUSETTS, MISSISSIPPI
SI Scales & Vulcan Scales Taxable States:
CALIFORNIA, CONNECTICUT, GEORGIA, ILLINOIS, KANSAS, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, OHIO, PENNSYLVANIA, SOUTH CAROLINA, TEXAS, WASHINGTON, WISCONSIN.
OnBoardScales.com
ApexEgroup LLC Direct Line - 1-330-476-2422
Text messaging - 1-330-476-2422
All SOLICITING Text Messaging Numbers WILL BE BLOCKED!
Receive 3% discount if paid by check on System Orders.
Large Volume Orders are Pay by Check or Wire Transfer ONLY!
Prices Subject to Change Without Notice
Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable
We record all calls for quality assurance.
Celebrating 31 years of Service in the Scale Industry.
Customers can contact us at emails listed below
Quotes@Onboardscales.com
International: ApexEgroupLLC@gmail.com
CopyRight © All Rights Reserved
OnboarScales.com Home Page

OnboarScales.com Home Page