Onboard Scales for Trucks and Trailers Onboard Scale System Sales, Service & Parts for:
Dump Truck Scales Logging Truck Scales Replacement Parts General Trucking Scales PNT Scales CAS Scales
Aggregate Truck Scales Refuse Truck Scales Aggregate Truck Scales Fifth wheel Scales LoadRunner Scales SCI Scales
Straight Chassis Scales Tipping Refuse Scales Custom Trailer Filling Scales Precision Loads Scales MSI Crane Scales
TradeRoute HL Scales Fixed Refuse Truck Scales Underbody Truck Scales Air Ride Truck Scales Aftermarket Parts
Wheel Loader Scales NTEP Onboard Truck Scales Forklift Scales NTEP Wheel Weigher Scales SI Meters & Vulcan V200, Load cells
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.
ApexEgroup LLC
Direct Line:1-330-476-2422
Celebrating 35 years of Service in the Scale Industry
International Sales: ApexEgroupLLC@gmail.com

Loss-in-Weight Dispensing Controls Scales

920i FlexWeigh 104
Loss-in-Weight Dispensing Controls Scales
Print, Tare, Weigh (2 Speed Dispense), Print, Hold

Pre-engineered and pre-programmed 920i FlexWeigh Systems are Rice Lake’s turnkey answer to many of manufacturing’s most commonly used weighing processes, providing clearly defined, immediate solutions for almost any operation. 920i FlexWeigh Systems combine the power and versatility of the 920i interface with the simplicity and strength of the FlexWeigh control panel.

No need for lengthy quoting or design obstacles. Each 920i FlexWeigh model is a standard design in its own right, factory tested and programmed for the task at hand. Stainless steel NEMA-4X enclosures and rugged, customizable operation switches guarantee industrial-strength and dependability, day after day, year after year.

Once you’ve selected the right model for the job, your 920i FlexWeigh System is shipped complete and ready to weigh, seamlessly transitioning almost any measurement task, into a fully automated weighing process.

Standard Features
  • Wallmount stainless steel enclosure
  • Application program 101, 102, 103, 104
  • Front panel switches: E-Stop, reset/resume, start
  • Softkeys for presets, CN#, ID#, formula#, totals
  • Accumulating subtotal & total registers
  • Transmitted audit trail
  • Digital I/O Board
  • Relay rack and SSR relay outputs

The 920i FlexWeigh 104 is designed for applications where a preset target weight is repeatedly dispensed from removable vessels or containers that may become empty during the sequence of a dispense. When an empty supply is detected, the system will prompt for more supply. When pressing Start, the system automatically tares the scale, starts the loss-in-weight dispense from zero, and stops as programmed; all while transmitting and storing

Dispensing Materials - Print, Tare, Weigh (2 Speed Dispense), Print, Hold
Use the following steps to dispense material from a scale.

1. Press the Start button on the unit. The system verifies the E-Stop button is pulled out and a valid target weight has been entered. The system then:
• Increments the consecutive number by one
• Tares the scale to zero (net mode)
2. The system begins dispensing either of three speeds while a 920i displays real time sequence progress.
Those three dispensing speeds include:
• Single speed dispensing - The system turns on fast fill until the target weight/preact weight is satisfied.
• Parallel speed dispensing - Turns on the fast fill and slow fill until the dribble weight is satisfied. The system then turns off the fast fill and leaves the slow fill on until the target weight/preact weight is satisfied.
• Dual speed dispensing - Turns on the fast fill until the dribble weight is satisfied. The system turns on the slow fill until the target weight/preact weight is satisfied.
3. If during the dispensing cycle the system determines that the material supply on the scale has run empty, the system will pause the automatic process and prompt for a resupply of material. The current dispensing process can resume from where it left off by pressing Start.
4. The system does the following when the target/preact is reached.
• Turns off the output based on the dispensing mode.
• Updates the subtotal weight and number of dispenses
• Updates the total and number of dispenses
• Turns on the Dispense Complete output.
5. The system delays for the Delay After Dispense time

Standard Features:
• Stainless Steel NEMA 4X enclosure
• Pre-programmed and configured 920i HMI Indicator/Controller
• Heavy-duty push buttons and switches E-stop, Start, Reset/Resume
• Built-in safety interlocks prevent start without adequate weight to complete cycle
• (2) 2amp, 120 VAC feed output (fast and slow feed)
• Emergency stop which can be resumed at any point
• Auto Tare on START
• Auto Print and Weight Total

• Switches for manual-override control
• Large-diameter pilot lights
• 120 VAC outputs for: Dispense Complete and Slow Cycle
• Customized software and hardware configurations
Note: All control systems are Consult before ordering
Model Description Price
Flexweigh-104-120323 Indicator,920i Flexweigh Systems 104, Stainless Steel Wallmount, 115/230VAC $ 3,495.00



ApexEgroup LLC Direct Line - 1-330-476-2422
Text messaging - 1-330-476-2422
Customer data is NOT stored on server.
Receive 3% discount if paid by check on System Orders.
Large Volume Orders are Pay by Check or Wire Transfer ONLY!

Prices & Product information is provided by Manufacturer. Subject to Change Without Notice.

Due to price increases in material/freight costs. All our Suppliers unfortunately had to increase pricing.

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable
We record all calls for quality assurance.
Celebrating 35 years of Service in the Scale Industry.
Customers can contact us at emails listed below
USA: Quotes@Onboardscales.com
International: ApexEgroupLLC@gmail.com
CopyRight © All Rights Reserved 1986 - Present.
OnboarScales.com Home Page
OnboarScales.com Home Page